Causes of Table Saw Kickbacks and How To Prevent it

best table sawTable saw kickback is, plainly and simply, gnarly; it’s frightening, dangerous, damaging and surprisingly common. A kickback occurs during a cut when, for one of a few reasons, a piece of wood stock is violently flung from a table saw and back towards its operator. The stock is propelled by the force and momentum of the saw’s engaged blade and catapulted back at the user at speeds that can reach (or exceed) one-hundred miles per hour. Accordingly, it is not unheard of for a piece of material to lodge itself into a wall, to damage other shop equipment, or to cause serious injury (and, although less commonly, death) to the user behind the machine. In short, table saw kickback can be pretty terrifying.Of course, this is something you won’t see happening when you purchase the best table saw instead of some cheap second hand portable table saw from a woodcrafter you don’t know personally and who might have misused his table saw in the past.

How is Kickback Caused?

Table Saw Limitations:

The kickback phenomenon is the result of a variety of defects existing with or caused by the saw, the blade, the stock and, of course, by the operator. In fact, the majority of sliding compound table saw kickback accidents are the result of operator error. To begin, however, with machinery limitations, kickback commonly occurs where lower power machines are asked to perform tasks that are too aggressive. When confronted with a catch, a bind or some other anomaly that slows the blade during a cut, where a more powerful saw can cut through the catch, a smaller compound saw can’t maintain momentum, its blade catches the work piece and forces the stock to kickback at the operator. The actual girth of a machine also contributes to the momentum it is capable of producing; if a saw’s arbor and the motor’s rotor are heavy, this will usually generate enough force to push the blade through an abrupt obstruction.

Improper Blade Use:

Like a machinery limitation, defects in a table saw’s blade are also notable agitators in the kickback movement. In certain circumstances, anything from a dull blade to a dirty blade can spit your work piece back at you. In fact, dull, dirty, broken, bent or warped blades can cause a kickback. Each of these cosmetic defects forces too much contact between wood and blade, generates too much friction heat, and grossly increases the chances that your blade will bite into your stock and fire back at you.

Using a blade that is not designed for the application being performed is another precursor to kickback. The most frequent errors in this camp involve operators using blades that are too fine or two small. Where a blade is too small (or doesn’t reach (on average) 1″ to 1-1/2″ above the stock being cut), the only downward pressure applied to the saw blade is manual and usually not sufficient enough. Eventually, the forward movement of the stock forces the piece upward with the forward edge of the blade; this, of course, will fling a work piece in the direction the blade is spinning (which happens to be directly at the user). Additionally, where too-small saw blades are being used, more saw teeth are inside a work piece at any given time and each saw tooth passes through a greater amount of material before exiting the stock. This generates excess heat, friction, and drag on the motor causing the motor to perform much closer to its stall level and encouraging a little (or a lot of) kickback.

Quite like a blade that is too small, a blade that is too fine does not provide enough downward force on a work piece and similarly encourages lift-off. Accordingly, for your personal safety and for the integrity of your results, always use a saw blade that is designed for the task you’re performing. This will enhance the performance of your saw and the outcome of your work. You must also ensure your blades are clean, sharp, straight and intact; otherwise, you’ll end up with less-than-perfect results and possibly a piece of stock in your thigh.

Wood and Work pieces:

A Kickback can also be caused by the wood or stock being cut. In fact, under a few circumstances your work piece itself might be the biggest contributor to kickback. Stock with a twisting, knotted or locked grain, one with internal pressure, or wood that is wet or pitchy (sappy) will commonly result in kickback. These characteristics in a work piece will introduce obstructions and obstacles between the blade and the stock and will produce too much friction during the cut.table saw reviews As aforementioned, this can forced the saw blade to bite and spit. Where pieces of sheet stock are thin, kickback can also occur if the stock is flexible enough to curl with the rotation of the blade (or if the sheet happens to be curled already). Accordingly, it is important to ensure your sheet stock is not allowed to lift off the saw table. Where sheet stock is wider than it is long, it is also crucial to ensure that thiswork piece is not allowed to twist with the saw blade’s rotation (it is recommended that users employ a miter gauge to hold large pieces square). If lift or rotation occurs, a saw tooth (usually nearer the rear) will catch the piece and launch it forward; this causes the blade to dig rather than cut and produces, of course, kickback.

If you don’t want to encounter kickback problems with your new table saw I would encourage you to read up on a lot of table saw reviews on the bigger e-commerce sites such as Target or Home Depot from other users before you decide on which table saw you are going to buy to complete your woodworking jobs or DIY tasks at your home. If you have any questions regarding your portable or sliding table saw you can always reach out and send me your questions from the form on our website. I look forward to hearing from you.

What Type of Table Saw Should I Buy?

Introduction To Table Saws

Table saw, a wood work tool will have most of us guessing or using the common sense of the general idea of this tool. Though through observation and best table saw reviews, most of us will have a better understanding of the tool in itself and the mechanics of its operation.

Truth be told only with proper training can one understand this machine operation.Table saws consist and sum up from micro table saws to heavy duty hence whether choosing for a specific operation or wishing to buy one a better understanding of how and where to use it is essential.

Contracting Necessity

The wood work and structural industry has rapidly grown and still expanding with new and sophisticated designs of furniture and interior decor stuffs being required. The growth and expansion of the designs has led manufacturers to produce machines competent enough to meet the designs and market or client expectations, hence the various model and designs of table saw.

Basically table saw is a wood working tool, fitted with circular blades of various designs and sizes depending on the saw itself and cuts to be made or the kind of timber being split.

The circular blades are mounted on an arbor, since users need for energy conservation both man power and electric hence the blade can be electrically, directly belt or gear driven. All this aimed at the diverse expectations and requirements of users, kind of customer care niche production.

General Modes of Table Saw

The market keeps getting improved and new models machines being produced, only through reviewing the best table saw can one make a decision, but primarily table saw can be divided into four general types;

Bench tops table saw

Also referred to as job site saws, it is recommended for for small scale contractors and production. Basically, these table saw as their name refers are are designed for tables tops.

They also require other manual support operation. Bench top table saw are light in weight, directly driven with an aid of a universal motor. They’re designed to be compact and hence convenient only in certain parameters of operation.

benchtop table saw

● Light in weight
● Portable to the working environment
● Cheaper in comparison

● Less effective
● Better in small scale production
● Limited operation capabilities

Contractor table saw

Most of the table saws that we find in most areas of operation especially commercial are contractor table saw. They are larger and heavier in size and weight and normally are attached to stands or base. Contractor table saw are often fitted with wheels for better handling. due to its size the blade is directly driven meaning it operates without a belt.Its is commonly used by woodwork fans or hobbyists and home contractors. Due to its operation dynamics only standard electrical circuits provide this table saw with the adequate power.

● Convenient for large scale
● Low cost of operation

● Dust collection problem
● Sound pollution

Hybrid table saw

The hybrid table saw basically was designed to be of competition against contractor table saw. Considering the advantages they have similar advantages with cabinet table saw.

Hybrid table saw have improved dust collection, some with mounted trunnions and others with cabinet is heavier than contractor table saws but lighter than cabinet with a special feature of sliding table enhancing the cross cutting process.

hybrid table saw

● Better and more precise cutting
● Heavy duty and commercial purposes
● improved dust collection
● Durable

● Competitive niche with contractor table saw similarity makes it hard choosing
● Heavy and lacks portability

Cabinet table saw

Cabinet table saw are huge and heavy, made from cast iron and steel, this gives the cabinet table saw an added advantage in that it reduces its vibration and noise pollution. It has an enclosed cabinet and this increases its cutting accuracy.Most common in commercial set up and industrial sights and gives value to the contractor large scale operation.

● Improved noise and dust pollution
● Durable

● Heavy and immovable
● High cost of maintenance

Which Table Saw-The Conclusion

While venturing into the purchasing of table saw or using one there are factors to consider, primarily their operational capability will be a good way to start. Working within your budget and operation parameters choosing the best table saw for you is the best choice you can make all things considered. Among other factors to consider, best table saw reviews are the best place to start your shopping or evaluation expedition.

Having detailed information from other users on first hand will greatly affect your choice and buying decision. The market keeps expanding and another factor to consider is having the help of an expert in the field of contracting.

Tips and Tricks For Choosing the Best Table saw

One of the tools you should probably have on hand for most major home improvement jobs is a table saw. It is very useful and will definitely be used over and over again. Of course, there are many different table saws to choose from out there. There are bench top table saws, contractor table saws, and cabinet table saws. Wondering which saw you should buy? Here is a look at how to buy the right table saw for home improvement projects.

Look at What You Really Need in a Table Saw

No matter what specific type you go with, there are some specific features that you should be looking for when purchasing your table saw. You want to make sure that the table is totally flat, you want the extensions to fit right, and you want to ensure that the fence is very sturdy as well. Think about what you really need in a saw as well. You need a saw that will do the jobs you need it to do. If you are only doing small jobs, then a bench top table saw will probably be enough for you. Most people doing home improvement projects find that this option is enough for them.

Think About the Dust

The dust should be thought about as you are choosing a table saw as well. There are some saws that are much easier to keep very clean. The cabinet saws are easier to clean, while the contractors table saws are the most difficult to keep clean from all that dust. Look for saws that have special ducts that will keep the dust from going all over the saw. You don’t want to end up having a huge mess when you use your saw.

Remember the Space You Have

It’s important that you consider the space you have available for the table saw when you are making your choice. If you don’t have a whole lot of space, then consider going with the bench top saw, which takes up the least amount of room. If you have more room, then you may want to go with one of the larger options, such as the contractors or cabinet table saw. Just remember, bench top saws don’t take up much room, but they aren’t as durable and accurate as the larger saws either. A table saw is going to be a pretty big investment. You’ll end up spending at least several hundred dollars and some of the larger options are more than $1000 for a good one. Make this choice carefully and keep these tips in mind to help you pick the best one for your home improvement needs.

The Relevance of Having the Right Table Saw

For many early 20th century immigrants, the American dream that they have been dreaming about before sailing to the New World would not be possible without Delta Machinery tools. Founded in 1919 by Herbert Tautz, Delta started out as a maker of small tools for home shops, the majority of which were owned by hardworking immigrants. Ninety one years later, Delta has never flagged down on inspiring millions of Americans. Having morphed into one of the premier makers of light industrial machineries, Delta is still fueling millions of dreams in America by producing high-quality power tools like a Porter Cable table saw.

Whether you are a woodworking enthusiast or a professional one who is earning a living with your woodworking craft, there would be no doubt in your mind that a quality table saw like a Porter Cable table saw is a must-have equipment. What is the Perfect Porter Cable Table Saw for your Workshop? Being one of the top power tools manufacturers, Porter Cable has several models of top class table saw. Purchasing a Porter Cable saw is definitely a worthwhile investment. There is no doubt about that. But what will be the perfect table saw from this brand for you? Well, the answer to that lies in your needs.

If you are doing heavy-duty work in your workshop, you may need to have a large table saw with a very powerful motor. Intensive woodworking requires your table saw to perform at a high level for long period of hours. Only a Porter Cable table saw with a powerful motor can do that. A Porter Cable table saw with a 3 HP or 5 HP true American Marathon Motor would be the perfect one for your workshop if you are engaged in heavy-duty woodworking. A 3 HP or 5 HP table saw would have no problem making accurate cuts for hours on end. It is really a monster table saw. But it will not only give you power: a 3 HP or 5 HP table saw also has an enormous and super-smooth table top that will provide a very stable work surface to ensure precise cuts are being made at all times. The 3 HP or 5 HP table saw also features the large blade opening that will make changing blades a scratch-free experience for users.

But large and very powerful table saws are only fit for large workshops. If you have limited space in your workshop and would need to move your table saw from one spot in your workshop to another to free up space, then you may need to get a portable table saw. With a mobile stand fold and two 8 inches wheels, the Porter Cable jobsite table saw would be your dream table saw: you can easily move this baby from one location to another. And the great thing is that you will not be compensating performance with a portable the Porter Cable jobsite table saw. With a 15 amp motor, the jobsite table saw can definitely perform woodworking work at a high level. For those who have spacious workshops but would only require light woodworking, then a 10″ stationary Porter Cable table saw would be the best choice. Built with a quality 15 amp motor, the 10″ stationary table saw has a spacious and smooth table top to help you make accurate cuts.